一、基本情况
  王秀宇,男,博士,副教授,硕士生/博士生导师。
  二、工作经历
  2007.4至今,任教于天津大学
  三、研究领域
  集成电路与薄膜片式电阻用低TCR高阻薄膜材料;
  电子封装与可靠性;
    固体钽电解电容器用PEDOT阴极材料;
    熔断电阻器用(助)熔断剂;
  敏感薄膜与传感器系统;
四、讲授课程
  《微电子可靠性原理》(本)、《微电子与固体电子技术工艺原理》 (本)
  《集成电路工艺技术》 (硕)
五、代表性学术成果
(I)论文:
[1] X.Y. Wang(?), Q. Cheng, X.P. Ma, H. Zhang, M.X. Li, T.N. Chen, P. Zhang, J.Q. Shao,      Improvement of reliability for high-ohmic Cr–Si thin film resistors in a heat and humid environment: Removing moisture source by electrocatalytic decomposition of water. Microelectronics Reliability, 60(2016)101–108.
[2] X.Y. Wang(?), H. Zhang, X.P. Ma, Q. Cheng, C.G. Li, M.X. Li, T.N. Chen, P. Zhang, J.Q. Shao,Degradation behavior and mechanism of polymer films for high-ohmic resistor protection in a heat and humid environment. Microelectronics Reliability, 57 (2016) 79–85.
[3] Xiaopin Ma, Xiuyu Wang(?), Mingxiu Li, Tongning Chen, Hao Zhang, Qiang Chen, ?A highly conductive poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) film with the solvent bath treatment by dimethyl sulfoxide as cathode for polymer tantalum capacitor. Chemical Physics Letters, 654(2016) 86–91.
[4] Xiaopin Ma, Xiuyu Wang(?), Mingxiu Li, Tongning Chen, Hao Zhang, Qiang Cheng, Improved   Performances of Solid Tantalum Electrolytic Capacitors Using EG-treated PEDOT:PSS  Conducting Polymer as Cathode Electrodes, Chemistry Letters, 45(2016)717–719.
[5] Hao Zhang,Xiuyu Wang(?),Qiang Cheng, Xiaopin Ma,Preparation of Li2MoO4 using aqueous solution method and microwave dielectric properties after sintering,Journal of Materials Science:Materials in Electronics, 27(2016)5422–5426.
[6] X.Y. Wang(?), J.X. Ma, C.G. Li, H.X. Wang. Thermosetting polyimide resin matrix composites with interpenetrating polymer networks for precision foil resistor chips based on special mechanical performance. Applied Surface Science,299(2014)73–80.
[7] X.Y. Wang(?), J.X. Ma, C.G. Li, J.Q. Shao. Structure and electrical properties of quaternary Cr-Si-Ni-W films prepared by ion beam sputter deposition. Journal of Alloys and Compounds,604(2014)12–19.
[8] X.Y. Wang(?), C.G. Li, J.X. Ma, J.Q. Shao. Deposition of Cr-Si-Ni-Mo films at a low sputtering current and performance of heat and humid resistance. Applied Surface Science,289(2014) 539–544.
[9] X.Y. Wang(?), Z.S. Zhang, J.Q. Shao, T. Bai. Effects of metal Ni with catalytic activity on magnetron sputtered Cr-Si resistive film in a heat and humid environment. Surface and Coatings Technology, 205(2010) 2611–2617. 
[10] X.Y. Wang(?), Z.S. Zhang, T. Bai, Investigation on powder metallurgy Cr-Si-Ta-Al alloy target for high-resistance thin film resistors with low temperature coefficient of resistance. Materials and Design,  31(2010)1302–1307. 
[11] Wang Xiuyu(?), Zhang Zhisheng, Bai Tian, Liu Zhonge, Thin film chip resistors with high resistance and low temperature coefficient of resistance. Transactions of Tianjin University, 16(2010) 348–353.
[12] Wang Xiuyu(?), Zhang Zhisheng, Bai Tian, Sun Guqing, Wang Jinlong, Huang Xiangdong, PF/EP/nano-SiO2 composite paint for resistor. Transactions of Tianjin University, 15(2009) 283–287.  
[13] Wang XiuYu,Yang GuiQin, Zhang ZhiSheng, Yan LeMei, Meng JianHua,  Synthesis of strong-magnetic nanosized black pigment ZnxFe(3-x)O4. Dyes and Pigments, 74(2007) 269–272. 
[14] Wang Xiuyu(?), Zhang Zhisheng, Li Haiyan, Hu Ming, Synthesis of modified epoxy resin undercoat for resistor by nano-SiO2. Transactions of Tianjin University, 12(2006) 193–198.
 (II) 在研项目:
 (1)国家自然科学基金项目,基于电催化反应Ni-W、Ni-Mo 提高Cr-Si 高阻
       薄膜耐湿热性能研究”,项目负责人;
 (2)天津大学青年教师创新基金(军工应用技术类),项目负责人;
 (3)安徽省科委, 精密金属膜电阻器用耐高温高湿涂料的研制及应用,项目负责人;
(III) 完成项目:
 (1)新型精密片式薄膜固定电阻器,第三参与人;
 (2)天津科委,薄膜电阻器、薄膜集成电路用磁控溅射靶材产业化科技攻关,
          第三参与人;
   此外,作为项目子课题负责人,完成总装项目一项;作为第二参与人,完成国防科工委军工项目2项;作为项目负责人,完成天津大学青年教师创新基金(军工应用技术类)一项。
 (IV) 专利转让项目:
 (1)横向(2011GZR-0003,科技成果转让),耐高温、耐高湿涂料用于金属膜电阻器的封装工艺方法,第一发明人;
 (2) 横向(2014GZR-0026,科技成果转让),精密金属箔电阻芯片用耐高温粘箔复合胶及其制备方法,第一发明人;
(V) 授权发明专利:
(1) 耐高温、耐高湿涂料用于金属膜电阻器的封装工艺方法, ZL 200910068486.1,第一发明
    人(已转化,并获2011年天津市专利金奖);
(2) 精密金属箔电阻芯片用耐高温粘箔复合胶及其制备方法,ZL 201210147157.8, 第一发
    明人(已转化);
(3) 金属膜电阻器用耐高温、耐高湿涂料及其制备方法, ZL 200910068254.6,第一发明人;
(4) 耐高温消融与透波涂料及其制备方法, ZL 200810151339.6,第一发明人;
(5) 金属膜电阻器用耐湿热丙烯酸/酚醛树脂/nano-SiO2涂料及其制备方法,  
    ZL200910228922.7,第一发明人;
(6) 具有高热稳定性和低TCR的富硅Cr-Si基电阻膜及其制备方法,ZL201310537486.8,第   
    一发明人;
六、所获荣誉
  (1) 年天津市科技进步二等奖,排名第2,证书编号:2010JB-2-021-R2. 获奖项目名称:高稳定金属膜电阻器用磁控溅射中高阻靶材及专用涂料
  (2) 年天津市专利奖金奖,排名第1,证书编号:2011-ZJ-010-01. 获奖项目名称:耐高温、耐高湿涂料用于金属膜电阻器的封装工艺方法
七、学术服务
 Materials Science and Engineering C, Corrosion science,Ceramics International,Physica Status Solidi A: Applications and Materials Science, Optoelectronics and Advanced Materials–Rapid Communications, Materials Sciences and Applications等期刊审稿人。
八、其它
在进行项目研究的同时,还重注科技成果的生产力化,解决了一些项目合作公司遇到的技术问题,已进行产学研项目合作的公司有:中国振华集团云科电子有限公司、双环集团贝迪斯电子有限公司、北京718友晟电子有限公司、山东济宁正和电子有限责任公司、长春东阳光电子有限公司(原793厂)、天津世美特电子有限公司、天津金信达电阻有限公司和天津三环电阻公司等。
九、联系方式
  办公地址:天津大学 微电子学院 26教学楼D区124/244
通信地址:天津市南开区卫津路92号,邮政编码:300072
  联系电话:13920863680
  电子信箱:wxy@tju.edu.cn